Description
Features:
Can be used to heat embossing powder and shrink film.
Hold the item 3 to 5 cm away and heat at an angle of approximately 45 degrees until complete.
Once finished, use a high-temperature heat gun for a few seconds.
This increases both hardness and shine.
The temperature is not adjustable; it can theoretically reach 200 degrees in a few seconds.
Do not heat for more than 10 minutes and blow at a 45-degree angle to avoid overheating. Exercise caution when using a heat gun.
Specifications:
Color: Black
Material: ABS
Type: Constant Temperature
Operating Temperature: 200°C / 390°F, reached in seconds
Rated Power: 300W
Power Supply: AC
Rated Voltage: 220V and 230V
Frequency: 50Hz
Body Time: 8 minutes
Material: Steel and Plastic
Operating Temperature: 200°C
Rated Power: 300W
Rated Voltage: EU Plug (220V)
Plug Type: EU Plug
Instructions:
1. Plug in the heat gun.
2. Hold the heat gun without touching the hot nozzle.
3. Hold the heat gun 5 to 6 cm from the workpiece and heat to approximately 45°C until the piece is finished.
4. Turn off the power to allow it to cool.
Reviews
There are no reviews yet.